Heating | Cooling | Solutions | Valve
ATEX-EX Electric Duct Heaters FATI Ex electric batteries are designed for use in Places with Explosion Hazard, Zones 1 & 2, groups IIA and IIB, temperature classes T1-T6. ATEX II 2G Ex d IIB T1-T6 certification, according to EN 60079-0 / 60079-1, and IECEx Ex d IIB T1-T6, according to IEC 60079-0 / 60079-1. Typical …
Electric Duct Heaters The electric heaters, with protection degree IP40, IP55, IP65, IP66, are suitable for use in a considerable number of industrial applications and processes, to heat air or gas flows inert, in a safe area. These products are designed by our technical department in accordance with the customer’s request or technical specifications. The …
ATEX-EX Threaded Heaters Threaded immersion heaters for Explosion Hazardous Locations, Zone 1 & amp; 2, groups IIA, IIB, and IIC, T1-T6 temperature classes. ATEX II 2G Ex d IIC T1-T6 certification, according to EN 60079-0 / 60079-1, and IECEx Ex d IIC T1-T6, according to IEC 60079-0 / 60079-1. The threaded immersion heaters are composed …
Threaded Heaters Our threaded immersion heaters are composed of tubular elements welded to a screw cap, which can be screwed to a threaded inlet placed in the tank wall. The electric heating elements are built with selected Ni Cr 80/20 wire, placed in the center of a metal tube, and insulated with high quality magnesium …
ATEX-EX Flanged Heaters The F.A.T.I. of flanged heaters is suitable for all process fluids, non-corrosive to construction materials, intended for installation in Areas with Explosion Hazard (Zone 1 & 2). ATEX-IECEx certification. Typical applications: • Fresh water • Sea water • Crude oil • Process gas • Air • Tank heating • Synthetic oils • …
Electric Heating Elements The electric are built with Ni Cr 80/20 wire, placed in the center of a metal tube and insulated with high quality magnesium oxide (MgO), compacted by cold drawing. The heating elements can be supplied smooth or finned, improving in this case the heat exchange with gaseous fluids. Various possibilities of materials …
The F.A.T.I. of flanged heaters is suitable for all process fluids, non-corrosive to construction materials. Flanged immersion heaters are made up of U-shaped bent tubular elements, welded to a flange, and complete with electrical safety components and connection housing (head). Typical applications: • Fresh water • Sea water • Crude • Process gas • Air …
SE ME-1-A-1-40-7-8-ATP-TPU-028-1- M , SE ME-1-A-1-40-7-8-ATP-TPU-030-1- M , SE ME-1-A-1-40-7-8-ATP-TPU-032-1- M , SE ME-1-A-1-40-7-8-ATP-TPU-035-1- M , SE ME-1-A-1-40-7-8-ATP-TPU-040-1- M , SE ME-1-A-1-40-7-8-ATP-TPU-047-1- M , SE ME-1-A-1-40-7-8-ATP-TPU-049-1- M , SE ME-1-A-1-40-7-8-ATP-TPU-062-1- M , SE ME-1-A-1-40-7-8-ATP-TPU-065-1- M , SE ME-1-A-1-40-7-8-ATP-TPU-083-1- M , SE ME-1-A-1-40-7-8-ATP-TPU-1-1- M , SE ME-1-A-1-40-7-8-ATP-TPU-13-1- M , SE ME-1-A-1-40-7-8-ATP-TPU-15-1- M , SE ME-1-A-1-41-7-8-ATP-TPU-028-1- M …
Bộ gia nhiệt Flange heater , Model: CXI1518F649X; Cat No. CXI- 20718-01, Drawing no.: C20718-Rev3
**CLEANVENT** **Bộ tách khí và cặn (Air & Dirt Separators)** Các nồi hơi hiện đại có lượng nước chứa rất thấp, khiến chúng dễ bị ảnh hưởng bởi các cặn bẩn tích tụ — nguyên nhân chính gây hư hỏng nồi hơi. Nguyên nhân chủ yếu của việc thiết bị bị hỏng là do …
