Terminator Thermon

Thermon DP | Terminator Power Connection Kit | Trace Heating Cables

Terminator Thermon

APPLICATION
Power Connection, In-Line/T-Splice, End Termination Lighted
Power Connection/End Termination. Terminator nonmetallic
termination kits are designed specifically for rapid, trouble-free
installation of Thermon self-regulating, power-limiting, and series
polymer insulated heating cables. The integral design of these
nonmetallic kits combines the pipe-mounted fitting, heating cable
grommet and cable strain relief into a single assembly. Screws for
securing the covers of the kits have been eliminated to simplify
cover installation while providing additional security (a tool is
required to remove the cover after installation).
Terminator kits are approved for use in ordinary (nonclassified)
areas and hazardous (classified) areas.
PETK Circuit fabrication kits are required for use with all Thermon
Parallel Heating Cables Connection Kits. Kits for termination of SX
cables include a power connection boot, end cap, RTV adhesive
and a caution label. Kits for termination of HPT and FP cables
also include tape strip and a distinct grommet.
SCTK Splice connection termination kits are required when
preparing outside-the-insulation splices with all Thermon Parallel
Heating Cables Connection Kits. Kits for terminations of SX cables
include 2 splice connection boots, assorted wire nuts and RTV
adhesive. Kits for termination of HPT and FP cables also include
a distinct grommet.

CONSTRUCTION
1 Junction box, glass-reinforced polymer 1 with DIN rail mounted
terminal blocks
2 Pipe-mount expediter, glass-reinforced polymer 1
3 Stainless steel pipe attachment band
4 Splice cap, glass-reinforced polymer

Hình ảnh này chưa có thuộc tính alt; tên tệp của nó là image-233.png

Terminator DP and ZP are
designed to fabricate power
connections, in-line/T-splice
connections or for making
end terminations. Electrical
connections are made in terminal
blocks utilizing nickel-plated
copper terminals to ensure
corrosion-free electrical integrity

Terminator DL and ZL are
designed to provide visual
indication of an energized heating
circuit. The kit may be utilized
as a power connection or an
end termination kit. Electrical
connections are made in terminal
blocks utilizing nickel-plated
copper terminals to ensure
corrosion-free electrical integrity

Terminator DS/DE and ZS/ZE are
designed to fabricate accessible
outside-the-insulation in line
splices or end terminations of
Thermon Heating Cables.
Electrical connections are
made using wire fasteners.
(For applications requiring
terminations to be made with
terminal block connections, the
Terminator DP or ZP kit may be
used.)

Terminator DE-B and ZE-B
are designed to provide visual
indication of an energized heating
circuit. The DE-B and ZE-B utilize
a high intensity green LED
assembly for superior day or night
visibility. Electrical connections
are made using wire fasteners.
(For applications requiring
terminations to be made with
terminal block connections, the
Terminator DL or ZL kit may be
used.)